Differential transmitters play a crucial role in various industrial applications, providing accurate measurements of the difference in pressure between two points. However, one common challenge faced by users is the presence of jitter, which can significantly affect the reliability and accuracy of the measurement. As a leading differential transmitter supplier, we understand the importance of addressing this issue and have extensive experience in developing solutions to reduce jitter. In this blog post, we will explore some effective strategies for reducing the jitter of a differential transmitter.
Understanding Jitter in Differential Transmitters
Jitter refers to the variation in the output signal of a differential transmitter over time. It can manifest as random fluctuations or periodic variations in the measured value, leading to inaccurate readings and potentially causing problems in industrial processes. There are several factors that can contribute to jitter in differential transmitters, including:
- Electrical Noise: Electrical noise from external sources, such as power lines, electromagnetic interference (EMI), and radio frequency interference (RFI), can corrupt the signal transmitted by the differential transmitter. This noise can cause fluctuations in the output signal, resulting in jitter.
- Sensor Instability: The sensor inside the differential transmitter may exhibit instability due to factors such as temperature changes, mechanical vibrations, or aging. This instability can lead to variations in the sensor's output, which in turn can cause jitter in the transmitted signal.
- Signal Processing Issues: Problems in the signal processing circuitry of the differential transmitter, such as improper filtering, amplification, or analog-to-digital conversion, can introduce jitter into the output signal.
Strategies for Reducing Jitter
1. Minimize Electrical Noise
- Use Shielded Cables: Shielded cables can help protect the signal from external electrical noise. The shielding acts as a barrier, preventing electromagnetic and radio frequency interference from reaching the signal conductors. When installing differential transmitters, make sure to use high-quality shielded cables and properly ground the shields to ensure effective noise reduction.
- Install EMI/RFI Filters: EMI/RFI filters can be used to suppress electrical noise at the input and output of the differential transmitter. These filters are designed to attenuate high-frequency noise while allowing the desired signal to pass through. By installing EMI/RFI filters, you can significantly reduce the impact of external noise on the transmitter's output.
- Separate Power and Signal Cables: Power cables can generate significant electromagnetic interference, which can affect the signal transmitted by the differential transmitter. To minimize this interference, keep power cables and signal cables separate and, if possible, run them in different conduits.
2. Improve Sensor Stability
- Thermal Management: Temperature changes can cause the sensor inside the differential transmitter to expand or contract, leading to variations in its output. To minimize the impact of temperature on sensor stability, implement effective thermal management techniques. This may include using a temperature-compensated sensor, installing the transmitter in a temperature-controlled environment, or providing proper ventilation to dissipate heat.
- Mechanical Isolation: Mechanical vibrations can also affect the stability of the sensor. To reduce the impact of vibrations, mount the differential transmitter on a stable surface using vibration-damping materials. Additionally, ensure that the transmitter is properly installed and secured to prevent any movement that could cause jitter.
- Regular Calibration and Maintenance: Over time, the performance of the sensor may degrade due to wear and tear. Regular calibration and maintenance can help ensure the accuracy and stability of the sensor. Follow the manufacturer's recommendations for calibration intervals and perform routine maintenance tasks, such as cleaning the sensor and checking for any signs of damage.
3. Optimize Signal Processing
- Proper Filtering: Filtering is an essential part of signal processing in differential transmitters. By using appropriate filters, you can remove unwanted noise and interference from the signal, reducing jitter. Low-pass filters are commonly used to attenuate high-frequency noise, while notch filters can be used to eliminate specific frequencies of interference.
- Gain Adjustment: Improper gain settings can amplify noise along with the desired signal, leading to increased jitter. Make sure to adjust the gain of the differential transmitter accurately to ensure that the signal is neither too weak nor too strong. This will help optimize the signal-to-noise ratio and reduce jitter.
- High-Quality Analog-to-Digital Conversion: The analog-to-digital conversion process can introduce quantization noise, which can contribute to jitter. Using a high-quality analog-to-digital converter (ADC) with a high resolution and low noise floor can help minimize this effect. Additionally, ensure that the ADC is properly configured and calibrated to ensure accurate conversion.
Our Differential Transmitter Solutions
As a differential transmitter supplier, we offer a wide range of high-quality products designed to minimize jitter and provide accurate and reliable measurements. Our SMP858-NST Differential Pressure Transmitter, for example, features advanced signal processing algorithms and high-quality components to reduce jitter and ensure stable performance. It is also equipped with robust EMI/RFI protection and a temperature-compensated sensor to improve stability in harsh environments.


Another product in our portfolio is the DMP305X-DST Differential Pressure Transmitter. This transmitter is designed to offer exceptional accuracy and low jitter, making it ideal for applications where precise measurements are critical. It features a compact design and easy installation, making it suitable for a wide range of industrial applications.
We also provide the SMP858-NST Differential Pressure Transmitter, which is known for its high reliability and long service life. This transmitter incorporates state-of-the-art technology to minimize jitter and ensure consistent performance over time.
Contact Us for Your Differential Transmitter Needs
If you are looking for a reliable differential transmitter supplier to help you reduce jitter and improve the accuracy of your measurements, look no further. Our team of experts is ready to assist you in selecting the right differential transmitter for your specific application and providing you with comprehensive technical support.
Whether you have a small-scale project or a large industrial installation, we can offer you the best solutions tailored to your needs. Contact us today to start a discussion about your requirements and how we can help you achieve accurate and stable differential pressure measurements.
References
- "Industrial Instrumentation and Control Systems" by B.C. Nakra and K.K. Chaudhry
- "Sensors and Actuators" by G.K. Fedder and T.A. Gulliver
- "Electromagnetic Compatibility Engineering" by Henry W. Ott

