Electromagnetic Flowmeter Advantage

• High Measurement Accuracy: Multi-electrode structure ensures high accuracy up to ±0.5%, ±1.0%.

• Good Stability: The accuracy isn't influenced by the fluid density, viscosity, temperature, pressure and electrical conductivity changes.

• High Reliability: Open flow without moving parts in measuring pipe, no pressure loss; The converter uses a low-power consumption single-chip for processing data which ensures reliable performance, high accuracy, low power consumption and zero stability.
• Open flow without moving parts in measuring pipe, no pressure loss
• Multi-electrode structure ensures high accuracy. With the grounding electrode, it doesn't need grounding ring which saves the cost.
• When power off, EEPROM can protect parameter setting and cumulative values

Electromagnetic Flowmeter Features

Diameter	Flanged DN10 ～ DN1600
Accuracy	Class 0.5
Electrode types	Standard fixed electrode
	DN10 ～ DN20 one pair of measuring electrodes, no grounding electrode
	DN25 ～ DN1600 one pair of measuring electrodes and one pair of grounding electrodes
Construction types	Integral, remote (remote cable length ≤50m)
Rated pressure	GB: PN6, PN10, PN16
	Others: Custom-made
Electrode	316L, Titanium (Ti)
Lining	Chloroprene rubber (CR)
Lining	Polytetrafluoroethylene (PTFE)
Meter tube	304 SS
Flange and body	Carbon steel, 304 SS
Transmitter housing	Cast aluminum
Power supply	220VAC
Power supply	12V DC, 24V DC
Output signal	4mA ～ 20mA DC (load resistance 0Ω ~ 750Ω, active output)
	Frequency, pulse output (optional passive or active)
	Upper and lower limit alarm output
	RS485 output (ModBus protocol)
Electrical connection	M20×1.5 ( Female)
IP rating	IP65: Dust proof, protected against waterjets. IP68: Protected against continuous immersion (sensor part only), suitable forinstallation in instrument wells
Ambient temperature	-20℃~ 60℃
Storage temperature	-40℃~ 60℃
Relative humidity	5% ～ 90%